LXR OSX build instructions

Tested on 10.8.x and 10.9.2; likely needs Xcode installed also (https://developer.apple.com/xcode/downloads/)

General steps

The LXR code is divided into two main parts

• the AVR Atmel code (display and front-panel control)
• the Cortex M4 ARM code (main LXR code for DSP, sequencer, USB etc.)

We need different toolkits to handle compilation of each set of code.

There is also a firmware compiling utility (see tools/FirmwareImageBuilder which generates the final firmware image for the LXR), which requires regular g++ to compile.

AVR toolchain

• Download the Atmel AVR 8-bit toolchain for Mac from http://www.obdev.at/products/crosspack/download.html
• You will get a .dmg file that you should extract and install (CrossPack-AVR-20131216.dmg is the most recent as of 2014/05/02)
• The compiler and libs are installed under /usr/local/CrossPack-AVR
  • Note: this will be a symlink to a folder like /usr/local/CrossPack-AVR-20131216

GNU ARM toolchain

• Download the GNU bare metal ARM toolchain from https://launchpad.net/gcc-arm-embedded
  • Note: get the Mac version (something like gcc-arm-none-eabi-4_8-2014q1-20140314-mac.tar.bz2)
• Extract the compressed tar file to /usr/local

   cd /usr/local && tar -jxf /path/to/gcc-arm-none-eabi-4_8-2014q1-20140314-mac.tar.bz2

Set environment variables

• We need to set a couple of environment variables for both compiler sets.

   export ARM_TOOLKIT_ROOT=/usr/local/gcc-arm-none-eabi-4_8-2014q1
   export AVR_TOOLKIT_ROOT=/usr/local/CrossPack-AVR

• You could add these to your $HOME/.bashrc to avoid setting them every time you start a terminal
  • Note: run source $HOME/.bashrc to avoid restarting your terminal the first time you do this

LXR source code

A number of different repositories are available:

   Julian's repository (original SonicPotions): https://github.com/SonicPotions/LXR
   rudeog's repository: https://github.com/rudeog/LXR -> extra features compared to Julian's repo.
   pld's repository: https://github.com/patrickdowling/LXR
   rstephane repository (https://github.com/rstephane/LXR -> equivalent to Julian's repo.

For example, from Terminal

   # This will create a new directory called "LXR"
   git clone https://github.com/rudeog/LXR

Makefiles are included in the rudeog & patrickdowling repositories

See https://help.github.com/ and http://git-scm.com/book for further tutorials about how to use Git.

Compile the firmware

• Open a terminal window, and change directory to where you cloned the repository

   cd /Users/music/Documents/workspace/LXR/

• To build the firmware

   make firmware

• To remove local build files

   make clean

• The generated firmware will be in firmware image/FIRMWARE.BIN
• Copy to your SD card, and update the firmware

If you have downloaded rstephane code, similar to @Julian and @PLD, you will notice that when you power on the machine, it displays "LXR-Drums-V" instead of "LXR Drums V". If so, you have successfully loaded (and compiled) the LXR firmware!!!!

Well done and happy hacking!