Enclosure SVG

From Sonic Potions Wiki
Revision as of 11:09, 22 April 2016 by Comboy (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

if you want to cut your own enclosure, here is a SVG file.
Thanks a lot to Shiftr for the design.

Shiftr's enclosure
also see this thread for more information

Here is a package containing some DXF and SVG files
LXR Dimensions .zip

HPGL file of the PCB
http://www.sonic-potions.com/public/lxr_hpgl.zip

Hole positions for the trigger IO backpanel
http://www.sonic-potions.com/public/trigger/trigger_holes_untested.svg
http://www.sonic-potions.com/public/trigger/triggerExtensionDimensions.zip

Altitude from the Forum provided some great case files for the acrylic enclosure

LXR_windows.eps: P1 size with snap in windows for the opaque cases. You can use clear or tinted plexi (I like the gray tint, dark)
http://www.sonic-potions.com/public/Altitude/LXR_Windows.eps

LXR window P2.eps: Opaque material, cutouts for window and LEDs, NO trigger extention
http://www.sonic-potions.com/public/Altitude/LXR_window_P2.eps

LXR window P2 trigger outs.eps: Same as above with trigger outs
http://www.sonic-potions.com/public/Altitude/LXR_window_P2_trigger_outs.eps

LXR No window P2.eps: transparent material, no windows or cutouts
http://www.sonic-potions.com/public/Altitude/LXR_No_window_P2_trigger_out.eps

LXR No window P2 trigger out.eps: Same as above with the trigger outs
http://www.sonic-potions.com/public/Altitude/LXR_No_window_P2.eps

All the cases are provisioned for a power switch: Cherry PRK22J5DBBNN
(mouser PN 540-PRK22J5DBBNN)